The precise control of your BGA rework station
PM6500 drives your IR6500 directly from Windows or Linux, without the original software — custom temperature profiles, real-time monitoring, three guided phases from the first degree to the cold desoldered joint.
A real cycle, from start to target
Connecting to the station, live PV/Target readout, chart following the actual ramp — recorded during a real rework session, not a simulation.
From a cold board to a soldered component
Four real steps, not a feature list — the same order you actually follow every time you repair a component.
Connect
Select the serial port of your IR6500 and connect — no proprietary driver to install.
Configure the profile
Pick a preset for your component or build your own ramps: rate, target and dwell, step by step.
Start the cycle
Removal, guided cleaning and soldering chain together on their own — or run them one at a time, whenever you need.
Monitor live
Real temperature, target and power on screen at every moment — with an immediate alarm if anything goes outside the limits.
The program, live
No mockups: captures taken directly from real working sessions on the IR6500 station.
Preset profiles by component
RAM memory, GPU BGA, LGA chipsets — ramp rate, target and dwell time already tuned for every step, always editable by hand, transferred to the station in one click.
Phase 1 — Removal, live
PV, P2 and target updated in real time, chart with the real curve compared to the step target — the exact same behaviour as the physical station.
Interactive cleaning guide
Between removal and soldering, a step-by-step guide — 8 steps — walks you through cleaning and preparing the component, from cooling down to the final check.
Built for people who repair for real
Ready-made presets, start in one click
GPU BGA, RAM memory, LGA chipsets, Wi-Fi chips — temperature profiles already tuned, always editable by hand.
Critical temperature alarms
Configurable thresholds on both probes, with an immediate stop if something goes wrong on the board.
No more original software
Speaks the station's serial protocol directly — free from the manufacturer's license and operating system.
Italian, English, German
The full interface in all three languages, every message and every guide — not just the main menus.
Every cycle logged
Export the full log or the CSV of each session — useful to document a repair or understand what happened.
Step-by-step cleaning phase
An interactive guide walks you through cleaning and preparing the component between removal and soldering.
Speak your workshop's language
One license, one PC, forever
- Activation bound to a single computer
- Free updates within this major version
- No account, no cloud: the license lives on your PC
You'll receive the key by email right after payment